How to set up PS Tizen Play
Setup takes a few minutes and you only do it once. After that the console starts with a single Play button.
Setup takes a few minutes and you only do it once. After that the console starts with a single Play button.
Check that you have all of this before you start.
Let the console show the game on another screen and switch on when the TV calls it. It is just a few switches in the console settings.
The controller connects straight to the TV, without wires. You only do this once.
Hold the PS and Share buttons on the controller (on a PS5 controller it is PS and Create) until the light bar starts blinking fast.
In the TV settings, find Bluetooth devices and pick Wireless Controller in the list.
When the light bar stops blinking and stays on, the controller is connected.
The app tells you what to do. Here is what you will see on the screen.
Settings → Remote Play Connection Settings → Add Device
Settings → System → Remote Play → Link Device
The better the console and the TV are connected to the router, the faster the game reacts to your buttons.
Connect the console to the router with a cable. This helps the most.
If a cable can't reach the TV, connect it to 5 GHz Wi-Fi: such a network usually has "5G" in its name. And move the router closer.
If the game is jerky, open Settings → Video in the app and choose Economy. If everything runs smoothly, you can choose Maximum.
Open Settings → Video → Player latency and choose Ultra-low. The TV will show the picture faster.
If the game stutters, set the resolution to 720p in Settings → Video. The picture gets a bit simpler, but the game runs smoother.
During a game press the yellow button on the TV remote: numbers appear on the screen showing how fast the game is running.
Check that the TV and the console are on the same Wi-Fi and the console is on or asleep. If that doesn't help, ask a grown-up to press Enter the IP address in the app.
Check the switches from step 1. Without them a sleeping console can't hear the TV.
The code on the console only works for a few minutes. Close the code screen, open it again and type the new code.
Choose Economy in Settings → Video and connect the console to the router with a cable.